Lantra Skid Steer Loader EXC09

What is a skid steer?

A skid loader, skid-steer loader, or skidsteer is a small, rigid-frame, engine-powered machine with lift arms that can attach to a wide variety of buckets and other labour-saving tools or attachments.

Skid-steer loaders are typically four-wheeled or tracked vehicles with the front and back wheels on each side mechanically linked together to turn at the same speed, and where the left-side drive wheels can be driven independently of the right-side drive wheels. This is accomplished by having two separate and independent transmissions; one for the left side wheels and one for the right-side wheels.

What does the Tuppco training course include?

• Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
• Have a working Knowledge of the manufacturer’s handbook for the particular machine to be used be able to locate and identify the major components of the machine and explain their functions
• Be able to locate and identify key controls and explain their functions
• Conduct all pre-operational checks in accordance with manufacturers and legislative requirements
• Identify and maintain PPE appropriate for skid steer loader use
• Conduct all necessary Safety checks at the Work area
• Prepare the skid steer loader for use, Operate machinery safely and efficiently
• Environmental considerations
• Storage and transport of implements and attachments
• Demonstrate Knowledge and understanding of loading and unloading procedures for Machine transportation
• Carry out all end of shift and shut down procedures

Venue and equipment requirements

• Suitable and safe area to operate and manoeuvre machine
• Bulk loads to load and move
• Varying terrain and slopes
• Suitable vehicle/hopper to load
• Suitable and safe area to complete paperwork
• Suitable welfare facilities
• Loading shovel and attachments
• Operators’ manual
• Risk assessment completed

Theory Assessment

• 20 multiple choice questions
• 5 written questions
• 4 marks per question
• 80% pass mark required

Practical Assessment criteria

• Pre use and operational checks
• Travel up and down slopes with hill starts
• Load vehicle/hopper x3
• Drive through chicane, forwards and backwards
• Create ramp incline, 1.5 times width x 1.5 times length of machine
• Reverse 30 metres in a straight line, through restrictions
• Drive over uneven and sloping terrain

Pass mark is less than 20 penalty points and no mandatory disqualifications

Time allowed is 1 hour 15 minutes

Where can Tuppco deliver on site training courses?

Tuppco can deliver onsite training nationwide using venue and equipment supplied